Thursday, March 28, 2019

Hotel Alte Post - 2



This won't be a very informative post, as I didn't take a lot of additional pictures of day two of the Alte Post construction ...as it all came together quite quickly...

Basic side walls and and an even more basic rear wall (brown pre-scribed sheet wood with a (badly cut out - as you can see) stiffening card piece.

You might note that the 'wings' supporting the side balconies - visible in the previous post - were removed - they seemed a bit high-up on the building so I removed them and added them further down the sides to line up with the 'third' floor (as counted by Europeans and others not believing in a 'G' floor)


Yellow coloured pencil was used for the window frames in the lower floor, the window-box flowers were as per the 'Upper Wassen' farmhouses detailed earlier.

The roof was the usual one-piece plastic stone/brick sheet to represent shingles, all folded up and contact glued in place. 

Side steps are a small trapezoidal piece of foamboard with steps drawn on.

I still need to make up a large vertical 'HOTEL' sign on the computer - the other signage and the little Xs on the window shutters were hand-drawn with a fine pigment pen in a fit of lazy impatience. As usual with most of my models, it is the effect of the scene and the illusion of detail within it that I hope resonates, not the individual details (or lack of them)!

 As finished, with various currency for scale:

The general shape (forced perspective narrowness aside) looks quite decent from road level, not that it will ever be seen from this angle on a Z scale layout!

Roughly placed on the layout:

In these pics it seems I should have put more black into my brown-wood mix, as the real Alte Post colour is almost black. Might see if that can be corrected.... 

Sunday, March 24, 2019

Hotel Alte Post - 1

One of the most distinctive buildings in Wassen is the Hotel Alte Post.


This was the first place I stayed on my first visit to the town (above), and just had to be included in the sample of buildings that will populate my model Wassen town.

Construction started using the usual random gustimating and drawing and re-drawing of lines until it looked about right, followed by some knifular commitment:


As usual, windows were cut out from the wooden frontage, and a card backing sheet cut so that the windows could be later drawn onto it. This also stiffens up the structure nicely and provides the white concrete lower floor.

Windows (badly) drawn and some details added in a slightly crooked fashion:

Yes, the entrance door is supposed to be offset a bit like this, but I'm a little off on my windows in the floor above (there should be fewer on the left-hand bunch). Drat. Hopefully nobody will notice...

A little paint, and it's starting to look half decent - when viewed from a considerable distance:

More to come... Same Bat-time, same Bat-channel.


And a finally, a thank you to Mr Anonymous, who has pointed out that the mysterious building I had labeled the Town Hall in the previous posts is actually a school.  I've since corrected these. Cheers. I'm glad we've finally found a useful use for the internet - sharing information. Apparently it's not just for porn, vanity, scammers and to give vain and vile dickless morons a platform for sharing their hate and stupidity afterall...  RIP the Christchurch 50.

Sunday, February 10, 2019

Schoolhouse - 2

Today I continued in the same vein as yesterday, putting 'windows' in the sides and making up a rear wall for once (with no windows!)

The walls were stuck together and cross-wall-bits for the dormers added in the roof area as above.

Then came the tricky trial-and-error fabrication of the roof, which is made of the thin brick-embossed plasticard that is being a used a bit around here....


It's close, but not exactly to the design of the original. Don't look too closely....

With a little paint, and hidden a safe distance away among some trees, it looks a bit better (it's just sitting in there and hasn't been attached, so may not be located quite as straight and level as it will soon be). Then again, it may look worse after...



Overall this looks pretty good for a few hour's work. The scale looks ok, and, because it is grey all-over, it doesn't shout out at you to look at it, which is exactly what I'd hoped for.

Saturday, February 9, 2019

Schoolhouse - 1

I had no idea what this building's purpose really is at Wassen, but it's quite distinctive, quite grand, and looks like it could be the town offices and/or town hall. It turns out it is the Schoolhouse - thanks to the commenter who has corrected me here.


A few random shapes were cut out Metcalfe N scale stone sheets (this is a stonework pattern printed onto card) and these were tried on for size on the layout.

Windows were marked, re-marked, and re-re-marked on the backside at various angles resembling the parallel and perpendicular, such that my cutting pattern on the first-marked wall looked more like a tartan.... Pick a line to cut along... any line...

Pieces coming together in the four prep stages:
  • windows cut out 
  • backed with white card
  • 'windows' drawn in and sills marked with a mechanical pencil (and a ruler at times)
  • a start at some overlay and detail added around the entranceway


The most 'interesting' side with the 'grand entrance' door faces the church, but I'm going to spin it 90 degrees and have it facing the front of the layout. This side has some interesting 3D features - as you can see, it is three layers deep, compared to the sides which are flat. These layers are being modeled, albeit heavily compressed. The real thing has an unusually laid out window pattern on this main entrance side (almost implying that the floors are not level, but I decided to make them line up a little better, at least between the outside and middle levels. Some artistic license, mixed with laziness and a dash of forgetfulness being applied as required.

Levels stuck together:


The inset door is from an offcut from when I shortened my brown house at 'Upper Wassen'.

Tuesday, February 5, 2019

Forest Planting on the Hills of Wassen

The hills are alive, with the sound of... trees.  For something different, I decided to plant a shipment of trees that I received recently.

The good news: they look good.


The bad news: I thought the additional 200 trees would be enough to do both hills, but after planting 150 on the North/Erstfeld/right end of the layout today (on top of the hundred I already have growing in the Meienreuss gorge) it looks like I could easily use an additional hundred or more for the South/Goschenen/left end hill.  


The winner so far for forest volume: Heki HK0309 1½"-3" ECONOMY UNFLOCKED PINE MINI-FOREST/100 PKG

At around $25USD for 100 trees (cheaper if you wait for a sale), that's a reasonable deal even with shipping to these far flung isles. En-masse, they look quite effective, with the more detailed guys in the foreground.

Other items in use from the recent order which are decent:
  • Heki HK1432 2"- 4¾" UNFLOCKED PINE SET/50 Trees - same style of tree as the bulk pack, but some taller ones, and less-good value than the 100 pack... and in Z who needs the additional height anyway... so I took an inch off the bottom of many of the tallest ones and used the offcuts as filler in the forest.
  • Heki HK0306 2"-3½" SMALL PINE MINI-FOREST/30 PKG - a lighter colour, flocked so reasonably nice, but a bit obviously "spiral-wound" when viewed up close. They look ok.
  • Busch BH6469  1½"-3½" FIR TREE SET/25 TREES - nice looking small/dark/well-detailed fellows
  • And I'm almost out of my previous JTT and Noch trees too, but have enough of the 'good' trees left that I'll probably only need to order one more of the 100-pack economy unflocked jobbies to add bulk to the South hill.
Less impressive:

HK0301 1½"- 3" PINES & DECIDUOUS FOREST/ 40 TREES Heki 'Ready-Made Mini-Forest!'  There are some weird, oddly coloured  and blobby looking folks in here. Not vert 'to-scale and not recommended for Z scale. I'll use what I can and hide the rest or put them in my scenery box.


Saturday, February 2, 2019

My Kingdom for a Z scale Re 6/6 - part 3

Where our hero discovers that when polishing up excrement, you eventually you realise that you're still left holding a piece of excrement...

The Re 6/6 story continued with the reinstallation of the end-slivers removed to make the shell thinner. The shell is looking reasonable now, although the slightly protruding foreheads are starting to annoy me. It looks acceptable from a distance though. 

Feet were provided by a passing Rokuhan bo-bo-bo chassis - which is a gorgeous piece of engineering compared to the rough guts of its Marklin 4/4 brother:


The chassis underbits were painted black, and with some trimming, the shell fits nicely on top. 

Even without any detailing of the stock Rokuhan chassis and it's short-wheelbase bogies, it doesn't look completely terrible except in these closeups.  I can add some air tanks between the bogies and some clutter to fill those air gaps out, and with everything painted black, hopefully the small bogies won't be too noticeable.


Other than this detailing and some shell-finishing, the Re 6/6 story will probably pause here for a while as there are a few issues to be resolved before continuing onwards: 

1. The Rokuhan chassis comes with a very tidy wee version of the 'Rapido' coupler that used to be the old N scale standard back in the dark ages. Obviously this isn't going to mate with a hideously big Marklin chunky coupler, but there are a few options...
  • Rohukan sells a Marklin coupler that will slot in. 
  • I could probably glue one-onto-tuther myself.
  • I could make a close-coupling solid drawbar between the locos (perhaps not a bad idea)
It's also chassis mounted (the 4/4's is bogie mounted) so some testing will have to occur on Wassen's tight curves - both between locos that could surge, and also between locos and the light wagons on a train that could be thrown off on a curve by a long, outswinging Re 6/6 chassis.


2. The Rokuhan chassis is considerably smoother, quieter and (unfortunately) faster than the Marklin, so it might need to be slowed down (with diodes perhaps)....  Or, more radically, I could buy a 4 wheeler Rokuhan chassis and put it under the 4/4. This way I wouldn't have to worry about the coupler issue between the locos. The old Marklin 4/4 chassis could be used later on to make a BLS brown 4/4.... Decisions, decisions.


Thursday, January 31, 2019

My Kingdom for a Z scale Re 6/6 - part 2

While a bit of work (and rework) has been going on behind the scenes on the Marklin Ae 6/6 -->  Re 6/6 project over the past few days, I don't have much in the way of pictures to show for it, as this wasn't that visually stimulating. Or stimulating at all in fact. But here is a summary report on the current sorry state of affairs from the Re 6/6 department:

  1. The paper roof grilles were darkened with a wash of black so they look a bit better now. 
  2. Some (fairly random) roof detailing was added ex the Ae 6/6 shell and painted.
  3. I cut away a sliver of the dark grey sill along the bottom of the sides, as the real locos have this shapeliness (the Re 4/4 and Ae 6/6 are flat along the bottom). I didn't do a great job of this - taking a bit much off in places and it's not that even or straight, despite using a metal straightedge of considerable even-ness. I probably should have just used a marker to put a sliver of black along the bottom in the right place.
  4. The red sides were given a light spray of dullcote varnish and this eliminated 95% of the barely-visible difference between the stock Marklin red and my painted red patches between the windows where the Ae grilles used to be.
  5. The tinted-clear strips containing the 4 rectangular side windows have been glued back into place
  6. The two larger 'main' front windows have been edged in silver like the prototype.



 So, with that largely sorted, I stuck everything together.

With the sides attached, it seems my homemade 6/6 roof is a smidge long (probably half a mm or less at each end) but overall it looks pretty decent alongside the 4/4, and at least they are the same width now.

Once this has all set solid, I'll add the sliver of red front and back that is missing in these pictures - it looks like it has a gap between its two front teeth at the moment. You may recall that this was removed to 'slim down' the overscale Ae 6/6 donor shell.

I'll also paint the quarter/corner windows dark grey in the next episode to match the other cab windows. The pantos are borrowed from another shell and just propped on top for looks here.

Obviously this conversion was never going to be a super-accurate, exact-scale model. For starters, the four side windows are too close to the roof. The position of the SBB/CFF/FFS on the side is too low... but that was never the intention here. It never is in my modeling. The plan was to get a believable Re 6/6 on the layout at a reasonable price and provide a bit of a modeling challenge and fun in the interim. So far we are on course...