The spate of recent rolling stock work can largely be attributed to the purchase of an old computer workstation and office chair from the Salvation Army charity shop. A modeling desk being an item that's been missing from my wardrobe for the past two years.
The desk had a slide-out keyboard tray which was cut down and re-installed to make a second shelf where the monitor used to go. On the right are slots for a CD library that will become more shelves for small projects in time. I suppose its fairly small, but that's entirely appropriate for the current Z scale projects. And it forces me to keep things tidy...
I also like being able to whizz around the room on my chair.
A further purchase - not yet installed - is a $4 old clamp-on bed headboard light that will be attached to the top shelf or beside the window to provide additional lumens when required.
Best $30 I've ever spent.
Sunday, November 6, 2016
Friday, November 4, 2016
InterRegio 4 - on the run
While I had the cars apart for their makeover, the opportunity was taken to trip or remove the buffers that I thought might have been upsetting the cars on tight curves and causing derailments.
Seems to have done some good, as I ran these around a bit yesterday with no problems whatsoever.
Are they perfect? No of course not - neither my painting nor the Marklin canvases underneath.
...But they do capture the 'essence' of an InterRegio train; and my modeling philosophy has always been that a 'close enough' model will always look better in a bigger scene, which allows me to steam through these things relatively quickly rather than seeking absolute perfection - or never finishing anything before losing interest.
One day I'll make some decals. I promise. In the interim, as far as I'm concerned, without my glasses on and squinting from the other side of the room: This train looks the shiznit.
Seems to have done some good, as I ran these around a bit yesterday with no problems whatsoever.
Are they perfect? No of course not - neither my painting nor the Marklin canvases underneath.
...But they do capture the 'essence' of an InterRegio train; and my modeling philosophy has always been that a 'close enough' model will always look better in a bigger scene, which allows me to steam through these things relatively quickly rather than seeking absolute perfection - or never finishing anything before losing interest.
One day I'll make some decals. I promise. In the interim, as far as I'm concerned, without my glasses on and squinting from the other side of the room: This train looks the shiznit.
Thursday, November 3, 2016
InterRegio - 3
Things proceeded at pace during a few short visits to the trainroom today.
The first class car came apart and was processed in a similar fashion to the two 2nd class cars. There were subtle differences - there are no end steps so the masking tape covering the unders didn't have much to hold on to and the 'gotcha' at the end being that the 4 pieces of 'glass' window inserts went back in a specific order and not in any other way.
The Marklin Panorama car is a bit different in its construction. Rather than the roof coming off, the body comes off the chassis on these, and the main curved glass pops out from the outside:
Despte this, it was tackled in a similar way to the other cars.
The roof grey had to come down a bit more than on the existing livery so I scored a line down to the appropriate distance with a knife and hand-painted down to it with a similar shade of custom mixed grey.
The red patches on the ends are a bit bigger on this car so my painting with the $2 paints ended up a little more lumpy. I also went mad and hand painted the yellow strip on top of the red that signifies first class on the prototype. This worked out considerably better than expected so the same was also applied to the first class car.
All in all, the train looks rather decent I reckon:
The real heros have been the black marker covering up the silver window frames and the acrylic paints - especially the Tamiya White. These are touch-dry in minutes so you can be on to another colour in no time, so my attacking of this passenger train was reminiscent of a bull loose in the proverbial china shop.
Just as a reminder, this is what they looked like a few days ago.
The first class car came apart and was processed in a similar fashion to the two 2nd class cars. There were subtle differences - there are no end steps so the masking tape covering the unders didn't have much to hold on to and the 'gotcha' at the end being that the 4 pieces of 'glass' window inserts went back in a specific order and not in any other way.
The Marklin Panorama car is a bit different in its construction. Rather than the roof coming off, the body comes off the chassis on these, and the main curved glass pops out from the outside:
Despte this, it was tackled in a similar way to the other cars.
The roof grey had to come down a bit more than on the existing livery so I scored a line down to the appropriate distance with a knife and hand-painted down to it with a similar shade of custom mixed grey.
The red patches on the ends are a bit bigger on this car so my painting with the $2 paints ended up a little more lumpy. I also went mad and hand painted the yellow strip on top of the red that signifies first class on the prototype. This worked out considerably better than expected so the same was also applied to the first class car.
All in all, the train looks rather decent I reckon:
The real heros have been the black marker covering up the silver window frames and the acrylic paints - especially the Tamiya White. These are touch-dry in minutes so you can be on to another colour in no time, so my attacking of this passenger train was reminiscent of a bull loose in the proverbial china shop.
Just as a reminder, this is what they looked like a few days ago.
InterRegio - 2
Continuing on from yesterday, a little red paint was splashed around the ends and the messy overspray cleaned up in dark grey - both hand-painted using my 2$ set of lumpy artists paints purchased from The Warehouse or some similar dollar-store.
The raised silver window frames were then drawn over using a marker:
And after reassembly, things were looking pretty sweet. The two modified cars are at the right compared to a stock car at left:
You can compare these to the prototype at the head of this blog. Close enough that a galloping racehorse wouldn't notice.
And from the Scary Closeups Department, modified car are at right compared to a stock car at left:
I'm impressed with the deletion of the silver windowframes but do need to make up some "SBB CFF FFS" decals for the sides.
The raised silver window frames were then drawn over using a marker:
And after reassembly, things were looking pretty sweet. The two modified cars are at the right compared to a stock car at left:
You can compare these to the prototype at the head of this blog. Close enough that a galloping racehorse wouldn't notice.
And from the Scary Closeups Department, modified car are at right compared to a stock car at left:
I'm impressed with the deletion of the silver windowframes but do need to make up some "SBB CFF FFS" decals for the sides.
Tuesday, November 1, 2016
InterRegio - 1
As you may recall, I picked up an SBB passenger car set recently.
The set is a car or two short of what I would ideally like to see on the layout, although a single loco will probably struggle to pull more than four cars up the hill anyway, so that's moot...
Other than this, the main concerns with the cars are that:
Hopefully that the former will be sorted out by my ongoing remedial trackwork tweaks and some adjustments to the unders - I have a feeling that the couplers are catching the buffers on sharp curves on at least one of the cars. Another car 'drags' a bit - as if a wheelset or two is rubbing on something.
The livery issue I'll tackle now - buoyed by the illusion of recent successes on the Habbiins wagons by the 51st Airborne Paint Application Corps.
So looking at the as-delivered models vs the real thing (as provided by the VGB Gotthard book), we can see that:
Second class cars disassembled:
Masked up (note that I have also masked a tiny rectangle to retain that red SBB logo:
Some paint was then applied. I used Humbrol gloss white. It was a disaster. Enamel whites often are -all creamy-coloured and thin so that they don't really cover anything with white at all - merely a whitey smokey sticky transparent colour. After some internet research, it seems acrylic flat white is the only way to go, so I headed downtown to procure the Tamiya production of same. Lo and behold: success, with a nice crisp arctic white coat over the grey:
Successful it seemed. But either my masking wasn't thorough enough, or more likely the thin runny Humbrol gloss soup seeped underneath, but I was left with a bit of a mess to clean up with a little overflow around the windows and to a lesser extent the unders:
In the next report, a 2$ paint set will be deployed to step back from this cliff of messiness.
The set is a car or two short of what I would ideally like to see on the layout, although a single loco will probably struggle to pull more than four cars up the hill anyway, so that's moot...
Other than this, the main concerns with the cars are that:
- they don't run that well
- they're in an older paint scheme
Hopefully that the former will be sorted out by my ongoing remedial trackwork tweaks and some adjustments to the unders - I have a feeling that the couplers are catching the buffers on sharp curves on at least one of the cars. Another car 'drags' a bit - as if a wheelset or two is rubbing on something.
The livery issue I'll tackle now - buoyed by the illusion of recent successes on the Habbiins wagons by the 51st Airborne Paint Application Corps.
So looking at the as-delivered models vs the real thing (as provided by the VGB Gotthard book), we can see that:
- The grey panel should be white (as should the bottom half of the doors).
- That silly grille amidships should be removed (its on one side of the models only).
- The red should extend laterally over a little more than the door
- The silver window frames stand out like dogs knobs.
- The strip amidships along the windows is a dark grey here. It should be black, but I'm hoping I can get away with what's here
- The white strip up top should be a little taller too (down to the windows) but again, I'm hoping I can get away with it as-is
- The model in the above pic is a first class car and has a thin yellow line above the windows. This should be painted out and replaced with some yellow in the red door patches that are barely visible on the prototype pic here on the last two cars of the train
Second class cars disassembled:
Masked up (note that I have also masked a tiny rectangle to retain that red SBB logo:
Some paint was then applied. I used Humbrol gloss white. It was a disaster. Enamel whites often are -all creamy-coloured and thin so that they don't really cover anything with white at all - merely a whitey smokey sticky transparent colour. After some internet research, it seems acrylic flat white is the only way to go, so I headed downtown to procure the Tamiya production of same. Lo and behold: success, with a nice crisp arctic white coat over the grey:
Successful it seemed. But either my masking wasn't thorough enough, or more likely the thin runny Humbrol gloss soup seeped underneath, but I was left with a bit of a mess to clean up with a little overflow around the windows and to a lesser extent the unders:
In the next report, a 2$ paint set will be deployed to step back from this cliff of messiness.
Sh*t Habbiins
Following on from the last post, a little weathering was applied to the Habbiins wagons in the hope of hiding any of the original artwork still showing through the dodgy airbrush work.
I don't have many proper model paints in sensible shades at the moment, so mixed up a variety of browny shades on a scrap of foamboard from some cheapie dollar-shop art paints, mixing various dollops of red, blue, yellow - with black and white seasoning to taste. The resulting mess was washed with some thinner and then drybrushed as appropriate.
I'm a bit out of practice, but the end result looks reasonable from the mandated minimum public viewing distance, which in Z scale must be about 2 metres.
I might yet break down and add a Transwaggon logo to the cleaner one at some stage.
Nice to have a couple of weathered wagons on the layout.
I don't have many proper model paints in sensible shades at the moment, so mixed up a variety of browny shades on a scrap of foamboard from some cheapie dollar-shop art paints, mixing various dollops of red, blue, yellow - with black and white seasoning to taste. The resulting mess was washed with some thinner and then drybrushed as appropriate.
I'm a bit out of practice, but the end result looks reasonable from the mandated minimum public viewing distance, which in Z scale must be about 2 metres.
I might yet break down and add a Transwaggon logo to the cleaner one at some stage.
Nice to have a couple of weathered wagons on the layout.
Monday, October 31, 2016
Whazza Habbiinsing - airbrushing a boxcar silver
![]() |
| Wassen, Dec 2015 |
Often they run in clumps like the above train (which may be carrying paper), but they will often pop up in general freight trains too. Many have silly yellow "Transwaggon" labels on the side as below, but that's completely reasonable since that seems to the company that owns many of them in these parts.
Tosh-railways is a nice source of pictures of these and other Euro wagons
As seems to be their business model, Marklin produces a range of weirdly painted "collectable" wagons of this style in Z scale, yet they don't seem to make (and may never have made) the silver ones that a Swiss modeller might actually like to buy a few of.
Fortunately I managed to pick up a few older stragglers off ebay that would be suitable candidates for Transwaggoning.
And with a quick de-topping:
Now I decided to do something out of my comfort zone: use an airbrush to paint them silver. I'm not much of a player in the dark arts of airbrushing. In fact I've only airbrushed one model in my life, but here I am, seeing if this equipment still works.
Before slathering the silver, I thought it might be interesting to mask off a few areas that could allow some factory-painted details to remain.
I've not used Tamiya masking tape before but boy is this stuff great. I used the blue calipers below to measure the width between panels and then cut off a few rectangles.... and applied them as you can see here on the wagon's lower end as it appears in the pic:
The stuff cuts easily with a knife, is forgiving and holds a line well. I taped off the roof centre and end walls on the white PanGas one for something different:
Out with the air blowing equipment: my old Aztek airbrush with a few nozzles that aren't completely clogged up with old dried paint, indecipherable airbrush instructions, a spray booth made from a card box, a nearby window is open to prevent me dying, paint, thinner, pipette, mixer, kitchen towels for the inevitable mess, latex gloves that I forgot to wear:
And a stick to hold the wagons with: old foamboard offcuts taped together:
Work in progress:
And with the little masking tape pieces removed:
All in all pretty decent. There's still a little of the previous paint showing through, especially on the dark Marklin one.
I could give them another coat, but I'll probably just apply some weathering to hide it.
Subscribe to:
Posts (Atom)
























